Analysis of laminated shells of revolution with laminated stiffeners using a doubly curved quadrilateral finite element

A finite element analysis of laminated shells of revolution reinforced with laminated stifieners is described here-in. A doubly curved quadrilateral laminated anisotropic shell of revolution finite element of 48 d.o.f. is used in conjunction with two stiffener elements of 16 d.o.f. namely: (i) A laminated anisotropic parallel circle stiffener element (PCSE); (ii) A laminated anisotropic meridional stiffener element (MSE).These stifiener elements are formulated under line member assumptions as degenerate cases of the quadrilateral shell element to achieve compatibility all along the shell-stifiener junction lines. The solutions to the problem of a stiffened cantilever cylindrical shell are used to check the correctness of the present program while it's capability is shown through the prediction of the behavior of an eccentrically stiffened laminated hyperboloidal shell.     

Behavior of untreated and crosslinked cotton fibers. I. Contribution of maturity

The physical and structural properties of American Upland cottons of different maturities have been examined carefully in order to identify fiber parameters which make significant contributions to easy-care properties. The cottons studied possess widely different degrees of overall orientation as determined from birefringence measurements and also exhibit slightly different crease recovery angles. These cottons also respond differently to swelling in sodium hydroxide solution of different concentrations. The physical and mechanical properties of these cottons modified by formaldehyde crosslinking are also compared. The increase in crease recovery angles and the concomitant tensile losses vary from cotton to cotton but are not dependent on maturity or fineness. The stiffness of crosslinked fibers decreases rather than increases with increasing bound formaldehyde. A comparison of the changes in the mechanical properties of formaldehyde-crosslinked cottons differing widely in orientation suggests that cottons with very high orientation are not suitable for chemical modification to impart durable press properties.     

The effects of xanthan and guar gums on staling of gluten-free rice cakes baked in different ovens

The objective of this study was to determine the effects of different concentrations of xanthan and guar gums and their blends on staling of gluten-free rice cakes baked in microwave-infrared combination oven (MW–IR) and to compare the cakes with conventionally baked ones. Gums were added at concentrations of 0.3% and 1.0%. For preparation of gum blend, 0.5% xanthan gum was mixed with 0.5% guar gum. In order to understand the staling behaviour of cakes, cakes were stored at 22 ± 2 °C for 120 h. Xanthan-guar gum blend decreased hardness, weight loss, retrogradation enthalpy and the change in setback viscosity values of cakes during storage for both types of ovens as compared to control formulation. It was found that oven type was a significant factor in affecting staling parameters of gluten-free cakes.     

Analysis and Implementation of a Time-Interleaved ADC Array for a Software-Defined UWB Receiver

A software-defined radio (SDR) for ultrawideband (UWB) communication systems places several stringent requirements on the analog-to-digital converter (ADC). One alternative to using a single ADC is to sample the received signal with an array of lower speed ADCs that were driven by interleaved sampling clocks; however, mismatches among the ADCs will result in signal distortion. This paper makes three important contributions to overcoming this problem: 1) analytical quantification of the impact of ADC gain, offset, and timing mismatches on the performance of a time-interleaved sampling ADC array for UWB signals; 2) demonstration of the efficacy of using a pilot-based matched-filter architecture to mitigate the impact of timing mismatches in the presence of multipath; and 3) implementation of an 8-ADC time-interleaved UWB SDR testbed that operates at an effective sampling frequency of 6.4 GHz. In addition, our findings allow for the design specification of the number of pilots required to obtain a desired system performance. The simulation and measured performance results from this paper demonstrate that ADC mismatches can be controlled to within plusmn10%, yielding acceptable levels of distortion and bit-error-rate (BER) performance on the UWB SDR testbed. Both analytical and simulation results also demonstrate the efficacy of a pilot-based matched filter in mitigating the impact of timing mismatch errors, even in the presence of multipath.     

The Two-User Compound Interference Channel

We introduce the two-user finite state compound interference channel. The main contributions involve both novel inner and outer bounds. For the Gaussian case, we characterize its capacity region to within one bit. The inner bound is multilevel superposition coding but the decoding of the levels is opportunistic, depending on the channel state. The genie aided outer bound is motivated by the typical error events of the achievable scheme.     

The Capacity Region of the Degraded Multiple-Input Multiple-Output Compound Broadcast Channel

The capacity region of a compound multiple-antenna broadcast channel is characterized when the users exhibit a certain degradedness order. The channel under consideration has two users, each user has a finite set of possible realizations. The transmitter transmits two messages, one for each user, in such a manner that regardless of the actual realizations, both users will be able to decode their messages correctly. An alternative view of this channel is that of a broadcast channel with two common messages, each common message is intended to a different set of users. The degradedness order between the two sets of realizations/users is defined through an additional, fictitious, user whose channel is degraded with respect to all realizations/users from one set while all realizations/users from the other set are degraded with respect to him.     

Immune Response among Patients Exposed to Molds

Macrocyclic trichothecenes, mycotoxins produced by Stachybotrys chartarum, have been implicated in adverse reactions in individuals exposed to mold-contaminated environments. Cellular and humoral immune responses and the presence of trichothecenes were evaluated in patients with mold-related health complaints. Patients underwent history, physical examination, skin prick/puncture tests with mold extracts, immunological evaluations and their sera were analyzed for trichothecenes. T-cell proliferation, macrocyclic trichothecenes, and mold specific IgG and IgA levels were not significantly different than controls; however 70% of the patients had positive skin tests to molds. Thus, IgE mediated or other non-immune mechanisms could be the cause of their symptoms.     

Conversion of Extracted Oil Cake Fibers into Bioethanol Including DDGS,Canola, Sunflower,Sesame, Soy,and Peanut for Integrated Biodiesel Processing

We have come up with a novel, integrated approach for making biodiesel by in-house producion of ethanol after fermentation of hexane extracted edible oil cake fiber. In addition, we have demonstrated how ethanol could be manufactured from commonly available oil cakes (such as canola, sunflower, sesame, soy, peanut) and dried distiller’s grains with solubles (DDGS). The edible oil cakes and DDGS were hexane extracted, ammonia fiber expansion pretreated, enzymatically hydrolysed and fermented to produce ethanol. From all the oil cakes tested in this work, DDGS and peanut oil cake showed the most promising results giving more than 180 g of glucose/kg of oil cake. These two feedstock’s were hydrolyzed at 15% solids loading and fermented by a native strain of Pichia stipitis. Most sugars were consumed during the first 24 h, with no pronounced inhibition of P. stipitis by the degradation products in the hydrolysate. Xylose consumption was more effective for peanut cake hydrolyzate compared to DDGS.     

Fire behaviour of hollow structural section steel columns filled with high strength concrete

The use of hollow structural section (HSS) steel columns filled with high strength concrete (HSC) is becoming popular due to many advantages they offer. However, whereas the design rules for HSS columns filled with normal strength concrete are well established, there are many uncertainties for HSS columns filled with HSC. Results from numerical studies on the behaviour of HSS columns filled with HSC are presented. The studies were carried out based on both North American and European material properties for HSC and steel. Results show that required fire resistance in HSS columns can be obtained through the use of bar- or steel fibre-reinforcement in HSC.     

A Rapid Synthesis of Oriented Palladium Nanoparticles by UV Irradiation

Palladium nanoparticles of average size around 8 nm have been synthesized rapidly by UV irradiation of mixture of palladium chloride and potassium oxalate solutions. A rod-shaped palladium oxalate complex has been observed as an intermediate. In the absence of potassium oxalate, no Pd nanoparticles have been observed. The synthesized Pd nanoparticles have been characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selective area electron diffraction and energy dispersive analysis by X-rays (EDAX) analyses. XRD analysis indicates the preferential orientation of catalytically active {111} planes in Pd nanoparticles. A plausible mechanism has been proposed for the formation of anisotropic Pd nanoparticles.